FAUN VARIOPRESS

The variable rear loader
The name says it all: the VARIOPRESS from FAUN impresses with its functionality combined with elegant design. The refuse collection vehicle shows its strengths in flexible use for the disposal of all recyclable and waste materials.

With the appropriate lift system, containers from MGB 60 l to MGB 1.1 m³ can be emptied. On request, up to 7 m3 emptying containers can also be picked up with special lifters. Thanks to the low loading sill and the option of manual loading, the vehicle is a worthwhile investment in every respect. The tried and tested details of the VARIOPRESS are regularly revised to meet customer requirements.

Side-mounted tailgate opening cylinder, optimally protected against external influences. Retracted when not in use.

The fillers between the rollers of the slide wall prevent waste from entering the guide rail. This prevents deposits that slowly constrict the guide rail from the outset.

Thanks to the internal cylinders and the closed guide rail made of highly wear-resistant steel, there are no openings in the rear section through which waste can fall out.

The limit switches integrated in the cylinder ensure smooth running and reduce noise and wear.

The double-acting telescopic cylinder on the discharge plate enables precise control of the back pressure. This means that compaction can be regulated or switched off completely depending on the fraction.

Optimum side area illumination thanks to all-round lighting

The hot-dip galvanised and universal intermediate frame is corrosion-resistant and can be mounted on any chassis without any adjustments. It enables flexible mounting of the container.

LED lighting (optional)

"Powered" running boards, electrically driven, automated.

All control functions in a compact control unit at the rear: This means that the operator has everything in view and everything under control - a decisive contribution to work safety. Also with bottle holder for the loader.

GOOD REASONS TO BUY ORIGINAL:
As versatile as the requirements:
Different containers, different fractions.

FAUN FCS control system

Everything in view with the intuitive FAUN Control System (FCS).

Previous slide
Next slide
Rear, centre or roof crane
For holding large containers and underfloor containers.

With transfer lifter

Manual lifter with two separate pick-up units for MGB and large containers.

Previous slide
Next slide

FAUN-Bin-Wash-Package

Use the FAUN Bin Wash Package to wash waste bins with high pressure and hot water.

SCS - Smart Compaction System

Automatic determination and setting of the compaction rate.

Narrow vehicle width

With a narrow width of 2.35 metres, it is ideal for narrow roads. For even more safety thanks to a better overview.

Alternative drives

Drive concept ideally suited for all electric chassis. Already in use in several variants.

Clean option

Active air purification in the lifter working area of the refuse collector.

en_GBEnglish (UK)